SENNEBOGEN Cranes on Paris Power Line Tunnel Project with Spie Batignolles Fondations
For this purpose, a 2.5 km long underground tunnel will be drilled in Saint-Denis in 2021. The first stage of this major project is the construction of boreholes that will allow the tunnel-boring machine to be lowered. With on-site support: Twowith XL hydro-milling machine and diaphragm wall grab. Thanks to the high load capacity of 24t at a working radius of 20m, heavy attachments can be operated in grab operation – certainly with guaranteed maximum stability thanks to the robust wide-track undercarriage. The maximum load capacity of the machines is 14 t.
This major project is located in a highly urbanized area, bounded by several railroad and waterway lines, where extensive work will take place until 2024. Also affected are power lines that are essential for the electricity supply of the northeast of Paris, as they supply around 800,000 households, including the train station Gare du Nord and Line 13 of the Paris Metro. To meet all these challenges, RTE has chosen a technical solution that is tailor-made and exceptional for an electricity distribution network operator: the construction of a 40 m deep tunnel to run the new lines.
For the realization of this tunnel, RTE relies on the expertise of Arcadis as deputy project managing company and on the consortium of the companies Spie Batignolles Fondations.
At the construction site, Spie Batignolles Fondations is using its two SENNEBOGEN 6140HD duty cycle cranes, which were recently delivered by. One of them is equipped with a powerful XL hydro-milling machine developed by Spie Batignolles Fondations itself. The 6140HD’s 708 kW engine and generously dimensioned hydraulic pumps drive this impressive attachment. The second is equipped with a powerful diaphragm wall grab. Its 350 kN free-fall winches are adapted to the size of the grab and the massive cylindrical walls to be built for this shaft.
The construction project will be split into 3 different stages. Currently, the first stage has startedwith the construction of the entrance and exit shafts for the tunnel-boring machine is taking place. The entrance shaft is located near Volta street in Saint-Denis. In 2021 the 2.5 km long tunnel will be drilled by the tunnel-boring machine so that in 2022 the new power lines can be installed and connected. This is followed by the dismantling of the pylons and overhead lines from 2023 to the end of 2024. The approximately 80 hectares of land that can be developed by these underground construction works will be used to accomodate new urbanized areas in the North of Paris.
SENNEBOGEN 613 E Working Underground in Europe’s largest rock-salt mine
SENNEBOGEN 355 E Telehandler on Port Handling Operations for Freyer GmbH
Sarens Lifts Puteaux Footbridge Sections in Paris
Sarens lifts the 460T of the Puteaux footbridge in Paris on the eve of the New Year