Schares' Cometto 4 axel SPMTs Install 160t Rail Bridge in lower Saxony – Heavy Lift News
9 Aug 2022

Schares’ Cometto 4 axel SPMTs Install 160t Rail Bridge in lower Saxony

In Oldenburg in Lower Saxony, the heavy goods specialists from Schares came together to transport a 160t railway bridge using two 4-axle SPMT combination in a side-by-side configuration.

 

To begin with, the 22.5m bridge had to be raised from a height of 3m to 5m at the reloading point.

 

To begin with, the 22.5m bridge had to be raised from a height of 3m to 5m at the reloading point. For this purpose, Enerpac Cube Jacks were mounted on the loading platform of the Cometto MSPE self-propelled vehicles. Then the combination with the 5m wide cargo moved in sideways over the abutments.

“With this vehicle’s electronic steering, a structure can be positioned to the exact millimetre”, said Cometto’s sales manager Joachim Kolb about the technology used for such a high-precision task. “The driver does that effortlessly and with great accuracy via the remote control.”

 

With the vehicles’ electronic steering, a structure can be positioned to the exact millimetre

 

Schares also benefits from the fact that the operator can use the special steering programme to turn the axles individually, whereby the loading platform always remains in position and does not perform any relative movement.

 

 

When the operator received the message “component in correct position” on the theodolite, the SPMT lowered itself and set the bridge down on its supports.

“We’re doing the same thing again next week”, said Christoph Schares. “Then the second decrepit railway bridge right next to it will be replaced.”

Featured Title photograph

When the operator received the message “component in correct position” on the theodolite, the SPMT lowered and set the bridge down on its supports. Photograph Courtesy of Schares

 

Source Cometto, Schares and Enerpac

Related news