Mammoet PTC delivers one solution for three lifts.
29 April 2018
Last year Sept. 2017 Mammoet completed this Project in South Korea.
The Onsan refinery is South Korea’s premier refining facility and a major contributor to the country’s thriving economy. With the aim to increase output, S-OIL was looking to expand the refinery.
Delivery of the PTC-200 in Onsan
A joint venture lead by Daelim was engaged to construct a Residue Upgrading Complex (RUC). The new facility would convert low value residue into high value products such as gasoline and olefin downstream products. As part of the construction of the RUC, three columns needed to be lifted into an upright position.
The challenge posed was that the columns weighed up to 2000 tons each and had to be lifted within the confined space of the refinery. The initial plan to use a gantry system was projected to take three months to complete because of the need to relocate it for each lift.
Assembly of the PTC-200 in double shift
However, before these works could begin the project experienced a delay, leaving the installation behind schedule. To optimize the construction schedule and work around the space constraints, S-Oil turned to Mammoet to provide a faster lifting solution that would reduce construction downtime. Mammoet responded immediately and proposed the PTC 200 DS ring crane as the best solution for the job.
Installation of the final column
The PTC 200 DS has a small footprint with a long reach and high capacity for lifting. As opposed to the gantry system, it could lift all three columns from a single location. Time was also saved in the assembly and disassembly of the PTC. It would usually take up to 12 weeks to complete both activities.
Mammoet sped up and mobilized an international crew that worked in double shifts. They completed the whole process in less than 7 weeks. Mammoet was on-site and off-site in a record time of 57 days, one month ahead of the original timeline based on the gantry system. This was the first ever deployment of the PTC 200 DS in South Korea.
Mammoet’s approach to use the PTC 200 DS reduced the impact of the works on neighboring areas within the refinery and saved a significant amount of time. By cutting 30% off the original timeline, Mammoet was able to help put the project back on track.
Civil works were able to swiftly resume, minimizing the project’s construction downtime and bringing S-OIL closer to opening their new Residue Upgrading Complex. SOURCE: Mammoet
See my earlier post HERE