Maeda mini crane does the job – Heavy Lift News
2 Oct 2018

Maeda mini crane does the job

Workers from Able Rigging used a Maeda MC305 mini crane to dismantle a Timberland SD35 derrick top of the new 29-story Third + Shoal building in Austin, TX.

Date 02 October 2018

Bigger isn’t always better, especially in the construction world. Able Rigging, based in New York, was tasked to remove a tower crane from a new high-rise building downtown Austin, Texas used a derrick crane on the roof to dismantle and remove the tower crane. However, that left the challenge of removing the 27 metres book derrick crane from the rooftop after the crane was taken away.

A Maeda MC305 mini crane was the solution to provide the lifting to disassemble the derrick and get it off the roof of the building. Space on the roof of the 29-story building was limited, and Able Rigging needed a machine that could be hoisted to the roof by the tower crane, disassemble the derrick, provide powerful lifting capabilities in a confined space and be removed from the roof by elevator.  

With its small size and weight, Able’s crews easily used the tower crane to hoist the Maeda to the roof of the glass building. Once the tower crane was removed, the 2975 kg capacity Maeda MC305 lifted the derrick’s components – weighing up to 907 kg each – during disassembly and then lowered them from the highest roof level down to a lower level with access to the construction elevator. The derrick components were then taken back to ground level on the elevator.

Small but powerful

Despite being on a confined rooftop with little room to maneuver, the Maeda MC305 was quickly and easily positioned on the roof to make the lifts of the derrick sections. Once the derrick removal was completed, the Maeda MC305 was taken to ground level by the same construction elevator.

“We chose the Maeda MC305 because it gave us the power, flexibility and the ease of use we needed for the job,” said Bobby LaChapelle, vice president of Able Rigging. “And we definitely used the MC305 to its full capacity.”

The MC305 was rented from Maeda USA’s dealer Inman Texas Company, based in Houston.

The MC305 is 1.9 metres wide and 1.22 metres tall in its travel configuration. It can fit through a standard double door for interior jobs. Depending on the power package, the overall machine weight is 3878 kg (diesel only model) and 4060 kg (dual power, diesel and electric motor model). The MC305 has a boom length of 12 metres and a maximum lift height of 14 metres, when equipped with the optional Searcher Hook.

Maeda produces four models for the American market, including three mini crawlers, the MC285, MC305 and MC405. Maeda also produces the CC1485 crawler crane that has a capacity of 6.6 tons.

Source American Cranes and Transport

Photo John Carpenter, Maeda USA